Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Page: 43 / 128

43
Kaleido - IP X320/X120
Installation & Service Manual
From multiviewer to peripheral devices
From peripheral devices to multiviewer
The following ports must be open on peripheral devices (e.g., router controllers):
Router drivers also use default ports:
Port Used for Transport Notes
25 SMTP TCP Simple Mail Transfer Protocol, for e-mail alerts.
5100 GPI-1501 TCP Used to obtain information from GPI-1501 General Purpose
Interface I/O modules.
i
i. See also: From multiviewer to multiviewer , on page 41.
5353 mDNS
discovery
UDP Used for mDNS discovery on multicast 224.0.0.251
8851 Al
Velte
TCP Used to obtain information from Plura (AlVelte)
Studio Production Timer (SPT) systems.
8910
ii
ii. Configurable.
TSL
(network)
TCP Used to obtain information from TSL devices that use the
TSL UMD version 5.0 protocol.
Port Transport Notes
2000 TCP Used to control a multiviewer's internal router via the SAM (Snell/Pro-
Bel) SW-P-02 protocol
4381 TCP Used to control a multiviewer's internal router via the Nevion (Network)
protocol
5194 TCP Used to control a multiviewer's internal routervia the NVEP Router
(NP0016) protocol.
5353 UDP Used for mDNS discovery on multicast 224.0.0.251
7600 TCP Used to control a Kaleido - IP multiviewer via a REST API
14000 TCP Used to control a multiviewer's internal router via the SAM (Snell/Pro-
Bel) SW-P-08 protocol
Port Driver Transport Notes
4000 ETL TCP
12345 GVG 7000 Native TCP
9193 NVEP NV9000 (NP0017) TCP
4381 VikinX Modular TCP
9100 Quintech TCP
12345 Sony HKSPC TCP GVGNP Emulator
5001 Utah RCP-3 TCP SC-4 Ethernet
2000 SAM (Snell/Pro-Bel) SW-P-02 TCP
14000 SAM (Snell/Pro-Bel) SW-P-08 TCP