Belden GRASS VALLEY KALEIDO Series, Installation & Service Manual

Page: 19 / 128

19
2
Installation
Introduction
This chapter provides information about system requirements, items shipped with your
Kaleido - IP unit and it will guide you through the installation of a Kaleido - IP X320, or
Kaleido - IP X120 multiviewer.
Getting Organized / Unpacking
Required Materials
Your Kaleido - IP system package includes the following:
• Kaleido - IP unit
• Installation hardware and rails, including manufacturer’s documentation for the rails
• Two 20cm (8in.) DisplayPort-to-HDMI active adapter cables
• Two power cords
• The Kaleido Multiviewers Documentation Resource Guide, which provides instructions
on how to access the documentation you need to install and use your new multiviewer.
See
Related Documentation
, on page 15.
In addition to the above, you will need the following (not supplied):
• One or two displays for every Kaleido - IP unit
• Keyboard, mouse for basic Kaleido - IP configuration
• One dedicated 1000Base-T (or 100Base-T) Ethernet switch with enough ports for your
Kaleido - IP units, client PCs, and Kaleido-RCP2 devices
• Dedicated 1000Base-T (or 100Base-T) Ethernet switches
• Up to three more dedicated 1000Base-T (or 100Base-T) Ethernet switches for your
Kaleido - IP X120 units equipped with four network adapters to connect to high-
bitrate data streams
Note:
In line with our commitment to environmental preservation, only the
Kaleido Multiviewers Documentation Resource Guide , and some related
documents (e.g., welcome letters, warranty cards) are distributed in printed
form. You can obtain the latest version of the Kaleido Software User’s Manual
and Installation & Service Manual for this multiviewer model, as well as the
Release Notes, from the Documentation Library section of the Grass Valley
website. Software, drivers, and sample databases are available from the
Downloads section of the website.