Section 7. Maintenance Procedures
Belarus 80.1/80.2/82.1/82.2/82
Р — Operation and Service Manual
89
Fig. 50
ADJUSTING THE POSITION OF RE-
LEASE LEVERS
With the transmission clutch installed on
the flywheel and mounting bolts re-
moved, adjust the position of clutch re-
lease levers (3) (see Fig. 50) with the
help of a special arbor (4) based on the
inner diameter of the bearing disk (5)
hub splines and abutting the hub end-
face. The arbor is provided with a con-
tact surface for the release levers to rest
against. For the arbor dimensions, see
Fig. 50. Using the adjusting nuts (2),
bring the release levers into contact with
the arbor surface and fit the lock wash-
ers (1).
In doing so, a distance of
А = 13±0.5
mm between the surface whereat the
levers (3) contact the throw-out bearing
to the bearing disk (5) end-face is pro-
vided. The difference in this dimension
for the individual clutch release levers
should not exceed 0.3 mm.