Belarus 80.1/80.2/82.1/82.2/82
Р —Operation and Service Manual
Section 4. Controls and Instruments
27
27, 28, 29
— hydraulic system distributor
handles: 27
— left-hand side out-
lets; 28
— right-hand side out-
lets; 29
— rear outlets. If the
tractor is not equipped with a
draft (position) control, then lever
29 controls lift linkage cylinder,
and lever 27
— left-hand side
and rear, interlocked therewith,
outlets. The hydraulic system
connection diagram can be
found on the instruction plate in
the tractor cab (see Fig. 4.1).
Each handle has 4 positions:
"Floating", "Forced Drop", "Neu-
tral", "Lift". With the diesel-
engine running and when in the
"Forced Lowering" position, the
lever should be held by hand.
30
— tachospeedometer programming
panel (see Fig. 9.2).
31
— starter and instruments switch. It
has three positions (to be moved
from its neutral): I
— instruments
supply; II
— starter ON; the posi-
tion to move counterclockwise
from the neutral
— autoradio
ON.
32
— downshift reduction gear control
lever. It has two positions: for-
ward
— "Reducer Engaged"
(tractor slowed down travel) and
backward
— "Reducer Disen-
gaged" (tractor speeded up trav-
el).
In tractors equipped with a
downshift
synchronized reduction gear
control
lever 32 has two position, as follows:
backward
— "Reducer Engaged" (tractor
slowed down travel) and forward
— "Re-
ducer Disengaged" (tractor speeded-up
travel).
Fig. 4.1
Fig. 4.1.1
