Belarus
МТЗ-80.1/82.1/82Р — Руководство по эксплу-
атации и регулировки
Раздел 6. Правила эксплуатации и регулировки МТЗ-
80.1/82.1/82Р — Руководство по эксплуатации
62
3. Select the draft control mode; to do
this,
raise
the
attached
ma-
chine/implement above the soil sur-
face and push selector arm (1) (see
Fig. 24) into the slot of draft control
lever (3) by turning the selector arm to
the left (if viewed in the direction of
tractor head-on travel). To facilitate
engagement, before introducing it into
the slot, swing the selector arm for-
ward (if viewed in the direction of trac-
tor head-on travel) until it registers
with the slot in the control lever (3).
4. On broad-gang implements, perform
adjustments of the ground-engaging
wheels and tools to height. When
ganged up with ploughs, raise the
ground-engaging wheel to its upper
position.
Rules and Practical Expedients
Drop the trailed implement/machine at
the beginning of the bout by pushing the
handle (1) (see Fig. 25) forward, along
the sector (3). The farther the handle ad-
vance, the greater the soil operating
depth.
When pulling the handle (1) backwards,
along the sector (3), the depth decreas-
es. With the depth adjustment complet-
ed, bring the stop (2) over the slot in the
panel to rest against the handle and lock
it in this position.
At the close of the bout, to shallow the
tools up, set the handle (1) into the «Lift»
position
— pull backward, up to a stop.
On completion of lifting, the handle
should return into the neutral position
«Neutral transport» (with the roller 4
against the sector 3) on its own.
At the beginning of each subsequent
bout lower the tool by shifting the handle
(1) forward until it rests against the limit-
ing rest (2).
Fig. 24.
Changing-over of draft (position) con-
trols:
1
— control method selector-arm; 2 — adjusting
valve hand-wheel; 3
— draft control lever; 4 —
position control lever.
Selector-arm positions: N
— neutral; I — position
control; II
— draft control
Fig. 25. Draft (position) control (for tractors
equipped with a unitized cab):
1
— handle; 2 — limiting rest; 3 — sector; 4 —
roller; 5
— spring; 6 — rod.
