Belarus 1523, Operating Manual

Page: 48 / 312

BELARUS- 1523/1523В /1523.3 /1523В.3 Drive Controls and Instrumentation
47
BELARUS- 1523.3/1523В.3
Gear-shift lever (27)
The gear-shift diagram is shown in the
figure on the right (Diagram I).
Pushbutton (27a) for engagement of the
lowest stage (L) of the GB reduction
gear.
Pushbutton (27b) for engagement of the
highest stage (H) of the GB reduction
gear.
Range selector lever (28)
A change-over diagram is shown in Fig-
ure on the right (Diagram II).
Fuel Feed Control Handle (29)
Pushing the handle in the direction of
tractor head-on movement increases the
fuel feed and vice versa. The rearmost
position of the handle corresponds to
minimum idling rotational speed.
1
PTO operating lever (30)
The lever has two positions:
• Position “ Т ” (brake): outermost rear
top position, the PTO is disengaged
and the tail-piece is braked.
• Position “F” (friction): outermost front
bottom position, the PTO is engaged
and the tail-piece rotates;
HLL Control Panel (31)
(see section “Construction and Opera-
tion”)
1
For stopping the engine or emergency shut-
down of the same, an additional handle is
provided.