Belarus 1523, Operating Manual

Page: 167 / 312

BELARUS-1523/1523 В /1523.3 /1523В.3 Construction and Operation
156
RHL Control Panel Manufactured by the BOSCH Company
ПУ -03 RHL Control Panel Manufactured by the Izmeritel Plant
1 – damping knob; 2 – damping warning lamp; 3 – handle for adjusting the tillage depth (clockwise – shal-
lower, counter-clockwise – deeper); 4 – red diagnostic alarm; 5 – handle for adjusting the limitation of lift-
ing the hitch linkage (clockwise – maximum lifting, counter-clockwise – minimum lifting); 6 – handle for
adjusting the drop rate (clockwise – quicker, counter-clockwise – slower); 7 – handle for selecting the ad-
justment method (clockwise – position one, counter-clockwise – draft one, in-between them – combined
method); 8 – hitch linkage drop warning lamp (green); 9 – hitch linkage drop lifting lamp (red); 10 – hitch
linkage control handle (upwards – lifting, downwards – drop, extra pressing down the handle in its bottom
position – plough entry for ploughing, middle position – disengaged); 11 – interlocking switch (transporta-
tion) – locks mechanically the handle (10) in the top position by shifting the switch to the right; 12 – RHL
position indicator (green, top mark of the scale: the RHL is in the top position, bottom mark of the scale:
the RHL in the in the bottom position).
The sequence of operations of control-
ling the rear hitch linkage is as follows:
• Set the adjustment method by means
of the handle (7) depending on the na-
ture of job;