Belarus 1523, Operating Manual

Page: 273 / 312

BELARUS- 1523/1523В /1523.3 /1523В.3 Scheduled Maintenance
262
Procedure 33. Replacement of the Fil-
ter Element of the HPS Oil Tank
• Screw out bolts (3) fixing the cap (4)
and remove the cap assembled with
the plug (5) and valve (6);
• Take the filter element (2) out;
• Очистите внутреннюю полость ста-
кана (1);
• Clean the inner chamber of the barrel,
refit the cap assembly (4) and tighten the
bolts (3).
NOTE: All further replacements of the
filter elements should be carried out
every 1000 hours of operation, simul-
taneously with the change of oil in the
HPS oil tank.
Procedure 35. Checking the Alternator
Fastening Bolts for Proper Tightening
Clean the alternator from dust and dirt.
Check the fastening bolts for tightness
and reliable fixation of the electric wiring
terminals.
Procedure 36. Check the Plays in the
Steering Link Joints (in case of instal-
lation of the FDA with two hydraulic
cylinders of the HPS)
With the engine running, turn the steer-
ing wheel in both directions for checking
the free travel and play in the joints (1) of
the steering link (4).
Should there be any plays in the joints,
proceed as follows:
• Remove the locking wire (3);
• Screw in the threaded plug (2) to elim-
inate the clearance in the articulated
joint;
• Lock the plug with wire (3).