BELARUS-1523/1523
В
/1523.3
/1523В.3
Construction and Operation
107
3. The FPTO should be engaged with
the engine idling; increase the engine
speed to the required only after the
agricultural machine has been
speeded up.
4. To change the tail-piece (1) (see Fig-
ure “Construction and Operation of the
FPTO”) disengage the FPTO, stop the
engine, unscrew six bolts (3), remove
the plate (2), take out the tail-piece (1)
and install the required one having
applied preliminarily a thin layer of
grease on the centring surface. To re-
assemble, repeat the above opera-
tions in the reverse order.
5. When changing oil in the reduction
gear, the new oil shall be filled to the
level of the check plug (13).
6. Check regularly the extension of the
control cylinder rod (dimension "A"
(see Figure “Front PTO”)). If the ex-
tension of the rod is less than 45 mm
in the position “FPTO Disengaged” or
more than 90 mm in the position
“FPTO Engaged”, replace the linings
of the belt brakes (20, 21) (see Figure
“Construction and Operation of the
FPTO”) of the planetary reduction
gear.
Summary of Contents for 1523
