Belarus 1523, Operating Manual

Page: 169 / 312

BELARUS-1523/1523 В /1523.3 /1523В.3 Construction and Operation
158
Aside from the above-described func-
tions, the electronic control system of the
rear hitch linkage has a “damping” func-
tion (quenching of oscillations of the
mounted implement when in transport).
To switch on the damping mode, pro-
ceed as follows:
• set the handle (10) to the “Lift” posi-
tion (on doing this, the RHL is raised
to its top position and automatically
disengaged);
• press the “damping” button (1) (when
it will be done, the RHL will move
downwards by 3% of the full RHL
travel) and the “damping” lamp (2) will
go out.
The “damping” button is located on the
RHL control panel (the pushbutton with
the icon
).
ATTENTION!
1. The “Damping” function is only op-
erative when the handle (10) is set
to the “Lift” position.
2. When on field jobs (ploughing, culti-
vation, and the like), the “Damping”
function switch shall be in its “OFF”
position.