55
To set screen format to a code unlock:
Enter the 4-digit code and press next.
This is now the code needed to unlock
the screen.
NOTE: system alarms will
automatically unlock the screen.
To set screen format back to the
standard non-coded format:
Select “Set screen lock format”. On
the keypad screen, leave the field
blank and press next.
In the event of a monitored gas alarm
being triggered, the monitored value
flashes red and the gas alarm mute
button becomes active. Press the
mute button for a 2 minute mute of
the audible alarm element.
6.8.1 Setting the Screen Lock Format
The screen lock format is set in the
Service Engineer area. The system
default setting is for a standard
(non-coded) screen unlock.
To change the screen lock format, log
into Service Engineer area and select
“Set screen lock format”.
NOTE: Service Engineer area only
available from start screen.
6.9 Alarms
Summary of Contents for NOxBOX mobile
Page 2: ......
Page 39: ...39 5 5 4 Neopuff Resucitator ...
Page 82: ...82 Notes ...
Page 83: ...83 Notes ...
