Becton, Dickinson and Company Bactec 9050 System User Manual Download | Manualshive

Page: 21 / 136

background image

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

BACTEC® 9050 System User's Manual

Other documentation which may be of interest to the user includes:

BACTEC® 9050 Installation and

Setup, MA-0102 - This document contains

important information about preparing your laboratory for, and installing
the BACTEC® 9050 instrument.

BACTEC® 9050 5-Minute OperatorTraining Guide, MA-0104 -This document

presents instructions on how to perform routine operations on the
BACTEC® 9050 instrument, in a step-by-step, interactive tutorial format.

BACTEC® Blood Collection Instructions, MA-0108 - This document presents

information on collection of specimens for use with the BACTEC® fluores-
cent instrument series.

BACTEC

Media

Package Inserts -These documents contain important infor-

mation on the use, storage, inoculation, performance,and limitations of each
type of BACTEC medium.They are included with each carton of media, and
are available upon request from the Technical Services Department.

1.6 Conventions

1.6.1 General

Keys

The four keys that have fixed functions are the UP ARROW (Increase) Key, the
DOWN ARROW (Decrease) Key, the HOME ROTOR Key, and the SILENCE
ALARM Key.These keys are marked with symbols representing their functions,
and operate identically regardless of the active display or operation. Six other

keys, the Software (Soft) Keys are teal in color, and have functions that vary

depending on the active display. Each display shows icons representing the cur-

rent Soft key assignments at the bottom of the screen.To perform the function
represented by the icon, press the corresponding Soft key.

The four fixed function keys are always identified in your BACTEC® 9050 docu-

mentation by CAPITAL LETTERS (e.g., SILENCE ALARM key).The software keys
are always identified by lowercase letters in quotes, and the words soft key (e.g.,
"vial entry" soft key).

End of Section

The end of each section of this manual is marked with an octagonal symbol. •

1.6.2 Symbols Used on the Equipment

The following symbols appear on the BACTEC® 9050 instrument:

8

M

A

- 0 ' 0 3 - 5

Artisan Technology Group - Quality Instrumentation ... Guaranteed I (888) 88-SOURCE I www.artisantg.com

«
...
19
20
21
22
23
...
»

Summary of Contents for Bactec 9050









































































































































Reviews:

No comments

Related manuals for Bactec 9050

Brand: Qingdao H.Y Pages: 6

Brand: DARKSTAR TECHNOLOGIES Pages: 4

Brand: TDW Pages: 2

Brand: Taurus Pages: 25

Brand: Vancare Pages: 3

Brand: Paitec Pages: 14

Brand: Yardistry Pages: 9

Brand: JB-Lighting Pages: 40

Brand: Raven Pages: 12

Brand: Zero 88 Pages: 20

Brand: Kapriol Pages: 32

Brand: Cabletron Systems Pages: 33

Brand: i-CAT Pages: 32

Brand: Federal Signal Corporation Pages: 12

Brand: Garmin Pages: 10

Brand: Naviom Pages: 31

Brand: Garelick Pages: 2

Brand: Gardico Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands