manualshive.com logo in svg

Beckhoff EL7201-0010, Documentation, Page: 77 / 208

Share
Download
Beckhoff EL7201-0010 Documentation Download Page 77

Commissioning

6.1.7

Configuration by means of the TwinCAT System Manager

(with TwinCAT from version 2.10.0 (Build 1241), using EL5001 from firmware version 0.7 as an example)

In the left-hand window of the TwinCAT System Manager, click on the branch you wish to configure (in the
example: EL5001 Terminal 6).

Fig. 95: Branch of EL5001

In the right-hand window of the TwinCAT System manager, various tabs are now available for configuring
the terminal.

„General“ tab

Fig. 96: “General” tab

Name

Name of the EtherCAT device

Id

Number of the EtherCAT device

Type

EtherCAT device type

Comment

Here you can add a comment (e.g. regarding the
system).

Disabled

Here you can deactivate the EtherCAT device.

Create symbols

Access to this EtherCAT slave via ADS is only
available if this control box is activated.

EL72x1-0010

77

Version: 2.0

Summary of Contents for EL7201-0010

















































































































































































































Reviews:

No comments