manualshive.com logo in svg

Beckhoff EL7201-0010, Documentation, Page: 196 / 208

Share
Download
Beckhoff EL7201-0010 Documentation Download Page 196

Appendix

12 - week of production 12
10 - year of production 2010
03 - firmware version 03
02 - hardware version 02

Determining the version via the System Manager

The TwinCAT System Manager shows the version of the controller firmware if the master can access the
slave online. Click on the E-Bus Terminal whose controller firmware you want to check (in the example
terminal 2 (EL3204)) and select the tab 

CoE Online

 (CAN over EtherCAT).

Note

CoE Online and Offline CoE

Two CoE directories are available: 
• 

online

: This is offered in the EtherCAT slave by the controller, if the EtherCAT slave does

supported it. This CoE directory can only be displayed if a slave is connected and opera-
tional.
• 

offline

: The EtherCAT Slave Information ESI/XML may contain the default content of the

CoE. This CoE directory can only be displayed if it is included in the ESI (e.g. "Beckhoff
EL5xxx.xml").

The Advanced button must be used for switching between the two views.

In Fig. 

“Display of EL3204 firmware version”

 the firmware version of the selected EL3204 is shown as 03 in

CoE entry 0x100A.

Fig. 182: Display of EL3204 firmware version

In (A) TwinCAT 2.11 shows that the Online CoE directory is currently displayed. If this is not the case, the
Online directory can be loaded via the 

Online

 option in Advanced Settings (B) and double-clicking on

AllObjects

.

Updating controller firmware *.efw

Note

CoE directory

The Online CoE directory is managed by the controller and stored in a dedicated EEPROM,
which is generally not changed during a firmware update.

To update the controller firmware of a slave switch to tab 

Online

, see Fig. 

“Firmware Update”

.

EL72x1-0010

196

Version: 2.0

Summary of Contents for EL7201-0010

















































































































































































































Reviews:

No comments