manualshive.com logo in svg

Beckhoff EL7201-0010, Documentation, Page: 203 / 208

Share
Download
Beckhoff EL7201-0010 Documentation Download Page 203

Appendix

10.5

Support and Service

Beckhoff and their partners around the world offer comprehensive support and service, making available fast
and competent assistance with all questions related to Beckhoff products and system solutions.

Beckhoff's branch offices and representatives

Please contact your Beckhoff branch office or representative for 

local support and service

 on Beckhoff

products!

The addresses of Beckhoff's branch offices and representatives round the world can be found on her internet
pages:

http://www.beckhoff.com

You will also find further 

documentation

 for Beckhoff components there.

Beckhoff Headquarters

Beckhoff Automation GmbH & Co. KG

Huelshorstweg 20
33415 Verl
Germany

Phone:

+49(0)5246/963-0

Fax:

+49(0)5246/963-198

e-mail:

[email protected]

Beckhoff Support

Support offers you comprehensive technical assistance, helping you not only with the application of
individual Beckhoff products, but also with other, wide-ranging services:

• support

• design, programming and commissioning of complex automation systems

• and extensive training program for Beckhoff system components

Hotline:

+49(0)5246/963-157

Fax:

+49(0)5246/963-9157

e-mail:

[email protected]

Beckhoff Service

The Beckhoff Service Center supports you in all matters of after-sales service:

• on-site service

• repair service

• spare parts service

• hotline service

Hotline:

+49(0)5246/963-460

Fax:

+49(0)5246/963-479

e-mail:

[email protected]

EL72x1-0010

203

Version: 2.0

Summary of Contents for EL7201-0010

















































































































































































































Reviews:

No comments