Beckhoff EL7201-0010 Documentation Download Page 73 | Manualshive

Page: 73 / 208

Beckhoff EL7201-0010 Documentation Download Page 73

Commissioning

Note

EtherCAT System Documentation

The comprehensive description in the

EtherCAT System Documentation

(EtherCAT Basics

--> CoE Interface) must be observed!

A few brief extracts:

• Whether changes in the online directory are saved locally in the slave depends on the device. EL

terminals (except the EL66xx) are able to save in this way.

• The user must manage the changes to the StartUp list.

Commissioning aid in the TwinCAT System Manager

Commissioning interfaces are being introduced as part of an ongoing process for EL/EP EtherCAT devices.
These are available in TwinCAT System Managers from TwinCAT 2.11R2 and above. They are integrated
into the System Manager through appropriately extended ESI configuration files.

Fig. 89: Example of commissioning aid for a EL3204

This commissioning process simultaneously manages

• CoE Parameter Directory

• DC/FreeRun mode

• the available process data records (PDO)

Although the "Process Data", "DC", "Startup" and "CoE-Online" that used to be necessary for this are still
displayed, it is recommended that, if the commissioning aid is used, the automatically generated settings are
not changed by it.

The commissioning tool does not cover every possible application of an EL/EP device. If the available setting
options are not adequate, the user can make the DC, PDO and CoE settings manually, as in the past.

EtherCAT State: automatic default behaviour of the TwinCAT System Manager and
manual operation

After the operating power is switched on, an EtherCAT Slave must go through the following statuses

• INIT

• PREOP

EL72x1-0010

73

Version: 2.0

«
...
71
72
73
74
75
...
»

Summary of Contents for EL7201-0010

















































































































































































































Reviews:

No comments