Diagnostics
EL5032, EL5032-0090
121
Version: 2.4
Text ID
Type
Place
Text Message
Additional comment
0x4000
Warning
Warning: 0x%X, 0x%X,
0x%X
General warning; parameters depend on event. See
device documentation for interpretation.
0x4001
Warning
System
Warning: 0x%X, 0x%X,
0x%X
0x4002
Warning
System
%s: %s Connection
Open (IN:%d OUT:%d
API:%dms) from %d.%d.
%d.%d successful
0x4003
Warning
System
%s: %s Connection
Close (IN:%d OUT:%d)
from %d.%d.%d.%d suc-
cessful
0x4004
Warning
System
%s: %s Connection (IN:
%d OUT:%d) with %d.
%d.%d.%d timed out
0x4005
Warning
System
%s: %s Connection
Open (IN:%d OUT:%d)
from %d.%d.%d.%d de-
nied (Error: %u)
0x4006
Warning
System
%s: %s Connection
Open (IN:%d OUT:%d)
from %d.%d.%d.%d de-
nied (Input Data Size ex-
pected: %d Byte(s) re-
ceived: %d Byte(s))
0x4007
Warning
System
%s: %s Connection
Open (IN:%d OUT:%d)
from %d.%d.%d.%d de-
nied (Output Data Size
expected: %d Byte(s) re-
ceived: %d Byte(s))
0x4008
Warning
System
%s: %s Connection
Open (IN:%d OUT:%d)
from %d.%d.%d.%d de-
nied (RPI:%dms not sup-
ported -> API:%dms)
0x4101
Warning
General
Terminal-Overtempera-
ture
Overtemperature. The internal temperature of the ter-
minal exceeds the parameterized warning threshold
0x4102
Warning
General
Discrepancy in the PDO-
Configuration
The selected PDOs do not match the set operating
mode.
Sample: Drive operates in velocity mode, but the ve-
locity PDO is but not mapped in the PDOs.
0x417F
Warning
General
Warning: 0x%X, 0x%X,
0x%X
0x428D
Warning
General
Challenge is not Ran-
dom
0x4300
Warning
Encoder
Subincrements deacti-
vated: %d, %d
Sub-increments deactivated (despite activated configu-
ration)
0x4301
Warning
Encoder
Encoder-Warning
General encoder error
0x4400
Warning
Drive
Drive is not calibrated:
%d, %d
Drive is not calibrated
0x4401
Warning
Drive
Starttype not supported:
0x%X, %d
Start type is not supported
0x4402
Warning
Drive
Command rejected: %d,
%d
Command rejected
0x4405
Warning
Drive
Invalid modulo subtype:
%d, %d
Modulo sub-type invalid
0x4410
Warning
Drive
Target overrun: %d, %d
Target position exceeded
0x4411
Warning
Drive
DC-Link undervoltage
(Warning)
The DC link voltage of the terminal is lower than the
parameterized minimum voltage. Activation of the out-
put stage is prevented
0x4412
Warning
Drive
DC-Link overvoltage
(Warning)
The DC link voltage of the terminal is higher than the
parameterized maximum voltage. Activation of the out-
put stage is prevented
0x4413
Warning
Drive
I2T-Model Amplifier
overload (Warning)
- The amplifier is being operated outside the specifica-
tion
- The I2T-model of the amplifier is incorrectly parame-
terized
