Diagnostics
EL5032, EL5032-0090
119
Version: 2.4
Text ID
Type
Place
Text Message
Additional comment
0x0001
Information
System
No error
No error
0x0002
Information
System
Communication estab-
lished
Connection established
0x0003
Information
System
Initialization: 0x%X, 0x
%X, 0x%X
General information; parameters depend on event.
See device documentation for interpretation.
0x1000
Information
System
Information: 0x%X, 0x
%X, 0x%X
General information; parameters depend on event.
See device documentation for interpretation.
0x1012
Information
System
EtherCAT state change
Init - PreOp
0x1021
Information
System
EtherCAT state change
PreOp - Init
0x1024
Information
System
EtherCAT state change
PreOp - Safe-Op
0x1042
Information
System
EtherCAT state change
SafeOp - PreOp
0x1048
Information
System
EtherCAT state change
SafeOp - Op
0x1084
Information
System
EtherCAT state change
Op - SafeOp
0x1100
Information
General
Detection of operation
mode completed: 0x%X,
%d
Detection of the mode of operation ended
0x1135
Information
General
Cycle time o.k.: %d
Cycle time OK
0x1157
Information
General
Data manually saved
(Idx: 0x%X, SubIdx: 0x
%X)
Data saved manually
0x1158
Information
General
Data automatically
saved (Idx: 0x%X,
SubIdx: 0x%X)
Data saved automatically
0x1159
Information
General
Data deleted (Idx: 0x%X,
SubIdx: 0x%X)
Data deleted
0x117F
Information
General
Information: 0x%X, 0x
%X, 0x%X
Information
0x1201
Information
Communication
Communication re-es-
tablished
Communication to the field side restored
This message appears, for example, if the voltage was
removed from the power contacts and re-applied dur-
ing operation
0x1300
Information
Encoder
Position set: %d, %d
Position set - StartInputhandler
0x1303
Information
Encoder
Encoder Supply ok
Encoder power supply unit OK
0x1304
Information
Encoder
Encoder initialization
successfully, channel:
%X
Encoder initialization successfully completed
0x1305
Information
Encoder
Sent command encoder
reset, channel: %X
Send encoder reset command
0x1400
Information
Drive
Drive is calibrated: %d,
%d
Drive is calibrated
0x1401
Information
Drive
Actual drive state: 0x%X,
%d
Current drive status
0x1705
Information
CPU usage returns in
normal range (< 85%%)
Processor load is back in the normal range
0x1706
Information
Channel is not in satura-
tion anymore
Channel is no longer in saturation
0x1707
Information
Channel is not in over-
load anymore
Channel is no longer overloaded
0x170A
Information
No channel range error
anymore
A measuring range error is no longer active
0x170C
Information
Calibration data saved
Calibration data were saved
0x170D
Information
Calibration data will be
applied and saved after
sending the command
“0x5AFE”
Calibration data are not applied and saved until the
command "0x5AFE" is sent
