Beckhoff EL5032 Documentation Download Page 47

Page: 47 / 142

Mounting and wiring

EL5032, EL5032-0090

Version: 2.4

5.8

ATEX Documentation

Notes about operation of the Beckhoff terminal systems in potentially explosive ar-
eas (ATEX)

Pay also attention to the continuative documentation

Notes about operation of the Beckhoff terminal systems in potentially explosive areas (ATEX)

that is available in the download area of the Beckhoff homepage

http:\\www.beckhoff.com

5.9

UL notice

Application

Beckhoff EtherCAT modules are intended for use with Beckhoff’s UL Listed EtherCAT Sys-
tem only.

Examination

For cULus examination, the Beckhoff I/O System has only been investigated for risk of fire
and electrical shock (in accordance with UL508 and CSA C22.2 No. 142).

For devices with Ethernet connectors

Not for connection to telecommunication circuits.

Basic principles

UL certification according to UL508. Devices with this kind of certification are marked by this sign:

Summary of Contents for EL5032















































































































































Search results

Summary of Contents for EL5032

Reviews:

Related manuals for EL5032

Brands by name

Popular brands

Beckhoff EL5032, Documentation

Search results

Summary of Contents for EL5032

Reviews:

Related manuals for EL5032

Brands by name

Popular brands