Becker BE A00 Operating Manual Download

Page: 119 / 155

119

TELEPHONE MODE

>>>

> D

> GB

> F

> I

> PL

•

Private mode

Hands free

You can transfer a call back to the cell
phone. The hands-free function is then
ended.
After the call is ended, the connection
to the cell phone is automatically re-
established.
Press the

Private mode

button. The

hands-free function is ended.
Press the

Hands free

button to make

and receive calls again via the
Navigation device prior to ending the
call.

•

DTMF tones

You can send DTMF tones during a call
(e.g. to check an answering machine).
Press the

DTMF tones

button.

Use the desired button in the menu
displayed to enter the respective tone.

Telephone settings

The telephone settings include all the
settings relevant for the telephone
mode.

In the main menu, press the

button.

Press the

Phone settings

button.

You will branch to the menu for the
telephone settings.

Start

In the menu, various pages with the
functions are available:

You can branch to the next or previous
page of the settings by pressing the
and

buttons or the scroll wheel.

Note:

All settings must be confirmed by
pressing the

button. With the

button, you can exit the current menu at
any time without having changed
anything.

Summary of Contents for BE A00




























































































































































Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands

Becker BE A00, Operating Manual

Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands