Becker BE A00 Operating Manual Download Page 62

Page: 62 / 155

>>>

NAVIGATION MODE

> D

> GB

> F

> I

> PL

Press

Add stage

to enter further

intermediate destinations as described
above.

When you have entered all intermedi-
ate destinations, press the

Done

button.

Give the route a name of your choice.

The stage menu for the new route will be
displayed.

Editing a route

Select the route you wish to edit.

Press the

button in front of the

stage you wish to edit.

The edit menu will be displayed. The
following options are available:

Notice (depending on model):

Here you can define a loading time.
This, in turn, has an impact on the calcu-
lations of the arrival time for the subse-
quent destinations of the route.

Enter the loading time in hours and
minutes using the buttons.

If you do not want to set any loading
time, press the

No loading time

button.

Option

Meaning

Show details

The data relating to the

intermediate destination
is displayed. From this
screen, you can display
the intermediate
destination on the map.

Summary of Contents for BE A00




























































































































































Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands

Becker BE A00, Operating Manual

Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands