Becker BE A00 Operating Manual Download Page 113

Page: 113 / 155

113

TELEPHONE MODE

>>>

> D

> GB

> F

> I

> PL

Dialing an available number

You may select directly the numbers/
names available in the number list.

To initiate the call, press the button
with the entry you want.

The call will be initiated.

Displaying or editing entries

Each entry included in the number list
can be displayed or edited.

Press the button field on the left next to
the entry you want.

A selection menu appears.

Lists loaded from cell phone

In the number list, call the respective
list using the buttons

Missed

Received

and

Dialled

With the

buttons, you may

scroll in the list in the relevant direction
of the arrow.

To initiate a call, press the button with
the entry you want.

Selection

Meaning

Show details

The data for the entry is

displayed (number and
name, time and date of
call, if available).

Protect entry

The entry is protected

against automatic dele-
tion (only available for
unprotected entries).

Remove
protection

The protection of the
entry is canceled
(only available for
unprotected entries).

Move up

Move down

The entry is moved
one position forwards/
backwards.

Delete entry

The entry is deleted
from the number list.

Delete all
entries

All entries are deleted
from the number list
(even the protected
entries).

Selection

Meaning

Note:

Press the

button in front of an entry

to display the data for that entry
(number and name, time and date of
call, if available).

Summary of Contents for BE A00




























































































































































Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands

Becker BE A00, Operating Manual

Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands