Becker BE A00 Operating Manual Download

Page: 129 / 155

129

TOOLS

>>>

> D

> GB

> F

> I

> PL

The country-specific information is
displayed (maximum permitted speed,
alcohol limits, etc.).

Below you will find a description of the
symbols used:

Press the

button or the

button

to exit the menu.

Blocking a section of the road
permanently

With the Block option you can block indi-
vidual route sections permanently. The
Navigation device then calcu-lates a di-
version to avoid a traffic obstruction.
Furthermore, existing blockages can be
removed

(with the Delete block-

age button) or be displayed on a map

Press the Block button.

A map of the vicinity near your location is
displayed.

Define the start and end point of the
section to be blocked by touching the
map.

Note:

Please note that the information may
not be complete and other regulations
may apply in the various countries.

Symbol

Meaning

Speed limit in built-up areas

Speed limit outside built-up
areas

Speed limit on motorways

Alcohol limit

Reflective jacket
requirement

Driving lights requirement
during daytime

Tow rope must be carried

Spare bulbs must be carried

Fire extinguisher must be
carried

Summary of Contents for BE A00




























































































































































Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands

Becker BE A00, Operating Manual

Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands