Becker BE A00 Operating Manual Download

Page: 68 / 155

>>>

NAVIGATION MODE

> D

> GB

> F

> I

> PL

The Route overview button

With the options in this setup menu you
can select the Points of Interest to be
displayed and whether TMC reports are
displayed in the map view when pressing
the Route overview

button.

Activate the option All Destinations.

The Route Overview displays the Points
of Interest selected in the POI Categories
menu. The display is recalculated every
two minutes.

Activate the option TMC On Route.

The Route Overview in the map view
displays TMC announcements.

Press the Select POI Categories button.

The Select POI Categories window is
opened. Three point of interest catego-
ries can be selected.

If you touch the preset option of one of
the POI Categories (POI 1, 2 and 3), a
selection list with 20 POI types appears.

The Guidance info button

In the

Guidance info

settings window

you can select which additional
information you would like displayed
during route guidance.

Press the

Guidance info

button in the

settings menu.

The

Guidance info

settings window

appears.

The following settings are available:

Setting

Meaning

Lane info

When this function is
enabled, a small arrow
indicates which lane
you should move into
in the case of multi-
lane roads.

Summary of Contents for BE A00




























































































































































Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands

Becker BE A00, Operating Manual

Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands