Becker BE A00 Operating Manual Download Page 111

Page: 111 / 155

111

TELEPHONE MODE

>>>

> D

> GB

> F

> I

> PL

The selected text message is displayed.

Press the

Read out

button in order to

have the message read out.

Press the

Options

button to display the

editing options for the text message.

•

Call back

By pressing the

Call back

button you

can start a call to the sender’s number.

•

Extract numbers

By pressing the

Extract numbers

button you can display any numbers
contained in the text message itself
and start a call to one of these
numbers if desired.

•

Clear form

By pressing the

Clear form

button you

can delete the selected text message
from the Navigation device memory
and from the phone’s memory.

Incoming text message

You will receive notification of any text
messages received, depending on the
settings under "Text message notifi-
cation (depending on the model)" on
page 122.
If you have activated the

Show popup

setting, the following menu will be dis-
played on receiving a new text message.

The following options are then available:

•

Read out

The text message will be read out.

•

Show text

The text of the message will be
displayed.

•

Ignore

The text message will be ignored, but
can be opened at a later time.

Note:

The message can only be read out if a
voice tagged with the abbreviation TTS
has been selected. See "Setting the
Voice" on page 79.

Summary of Contents for BE A00




























































































































































Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands

Becker BE A00, Operating Manual

Search results

Summary of Contents for BE A00

Reviews:

Related manuals for BE A00

Brands by name

Popular brands