BayTech LASERSHARE PS-MIO, Owner'S Manual

Page: 89 / 133

2g. The
Time Out
interval is used by the Print Server Plus
to instruct the local network workstation to reinitialize
advertising after the modem connection has been
terminated. If a remote workstation has a connection
with a local host workstation and the modem
connection is disrupted or terminated, the remote
user may re-establish the modem connection and
resume the session with the local host workstation
before the
Time Out
interval elapses. The default
Time Out interval is 90 seconds and may be
programmed from 0 to 650 seconds. If you program
the
Time Out
interval to be 0 seconds, the Print
Server Plus will immediately instruct the local host
workstation to reinitialize after the modem connection
has been terminated.
2h. The Nmbr of Rings is the actual number of rings the
Print Server Plus will wait before sending out the
Answer String described in Step 2c. The default
Nmbr of Rings is 0. You may program the Nmbr of
Rings
from 0 to 99 rings. Use this option if your
modem is not in the auto answer mode.
3. pcANYWHERE/LAN Host Setup: Here we assume that
you have some knowledge of Norton pcANYWHERE/LAN.
We will limit the discussion to those considerations that
pertain to dial-in modem applications using the Print Server
Plus. Use the following procedure:
3a. Load pcANYWHERE/LAN by typing AWLAN from the
appropriate prompt. Select
Hardware Configurations
from the Main Menu.
3b. Type <INS> to add a new configuration. Enter the
desired identifying name up to 30 characters followed
by <ENTER>. A "Configuration: XXX" menu will
appear where XXX is the desired identifying name.
This menu shows several fields. You will need to