manualshive.com logo in svg

BayTech LASERSHARE PS-MIO, Owner'S Manual

Share
Download
BayTech LASERSHARE PS-MIO Owner'S Manual Download Page 60

54

 

 

PRINT SERVER CONFIGURATION -
[ Configure Port ]

If you select 

[ Configure Port ]

 from the "Print Server Configuration"

menu, you may configure the selected printer with respect to name,
buffer size, starting form, Q change mode, type, interrupt enable,
and interrupt number.  For serial ports, you may change the baud
rate, data bits, stop bits, parity and handshaking.  For BayTech
print servers, you may program the port to be a printer or modem
port.  The "Port Configuration" menu will appear as follows for
serial ports:

Make the desired changes and select 

[ OK ]

 to install the printer.  The 

[

Next Printer ]

 selection allows you to configure the next highest printer

port.  Refer to your NetWare Print Server documentation for a description
of Starting Form and Q Change Mode.

NOTE:  Any menu item with a 

(+)

 adjacent to it indicates a list of possible

choices may be accessed by either pressing <Space Bar> or double
clicking with the mouse.  Baud rates above 9.6K are not available for all
print servers other than BayTech.  

Printer Type

 and 

Use Interrupt

 are

available on non-BayTech print servers only.

Summary of Contents for LASERSHARE PS-MIO






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands