ii.
Select a queue from the "Available Queues"
list.
iii.
Enter the desired priority level 1 to 10 with 1
being the highest priority.
iv.
Repeat items i through iii for each queue to be
serviced by the selected peripheral port.
v.
Select any other printers on the BayTech print
server which will service print queues and
repeat items i through iv.
5.
Repeat Step 4 for each BayTech print server you have
installed on the network and then exit PCONSOLE.
6.
Activate the BayTech print server by applying power to it.
7.
The installation is complete. You should use the BayTech
software utility if you need to change any of the BayTech
print server settings. Refer to
Section 7.8
for a detailed
explanation of the various utility commands. Otherwise, you
should be able to print through the BayTech print server
using normal NetWare print commands (e.g., CAPTURE,
NPRINT, or PCONSOLE). BayTech print server will support
all of PCONSOLE's Print Server/Control functions. Please
see
Section 8
for modem sharing instructions and
Section 9
for a definition of the LEDs on the front panel. If you
experience any difficulties, please refer to
Appendix C
(Troubleshooting).
Summary of Contents for LASERSHARE PS-MIO
