manualshive.com logo in svg

BayTech LASERSHARE PS-MIO, Owner'S Manual

Share
Download
BayTech LASERSHARE PS-MIO Owner'S Manual Download Page 74

68

8.

Assign the ports on the selected print server to service print
queues as follows:

a.

Highlight the desired peripheral and select 

File

Servers/Queues

 from the "Configure Printers" menu.

NOTE:  The desired peripheral must be installed on
the print server before you assign print queues to it.

b.

Highlight the desired queue in the 

Available Queues

list and select 

[ Add <= ]

.  Assign the print queue the

desired priority, 1 to 10 with 1 having highest priority. 
Repeat this step for all desired queues on the
selected printer and exit the "File Servers & Queues"
menu.

c.

Repeat steps 8a and 8b for the remaining ports on
the selected print server and then repeat all of Step 8
for any other print servers added to the network.

9.

The installation is complete.  You should be able to print
through the BayTech print server using normal NetWare
print commands (e.g., CAPTURE, NPRINT, or PCONSOLE).
 BayTech print server will support all of PCONSOLE's Print
Server/Control functions.  Please see 

Section 8

 for modem

sharing instructions and 

Section 9

 for a definition of the

LEDs on the front panel.  If you experience any difficulties,
please refer to 

Appendix C

 (Troubleshooting).

Summary of Contents for LASERSHARE PS-MIO






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands