manualshive.com logo in svg

BayTech LASERSHARE PS-MIO, Owner'S Manual

Share
Download
BayTech LASERSHARE PS-MIO Owner'S Manual Download Page 56

50

 

PRINT SERVERS - [ Oprs ]

The 

[ Oprs ]

 selection in the "Print Servers" menu allows you to

assign or remove print server operators from the selected print
server.  The "Print Server Operators" menu will appear as follows:

This menu shows 

Print Server Name:

, 

Current File Server:

, 

Present

Operators

, and 

Available Operators

.  You may change the current file

server by clicking on the 

 symbol shown adjacent to the 

Current File

Server:

 field or by typing ALT-C.  The list of logged file servers will

appear.  Highlight the desired file server and then press <ENTER> or
double click.  The selected print server will appear in the 

Print Server

Name:

 field.

You may add an operator in the 

Available Operators

 list to the 

Present

Operators

 list by highlighting the desired operator and selecting

[ Add <= ]

.  You may remove an operator in the 

Present Operators

 list by

highlighting the desired operator and selecting 

[=>Remove]

.

NOTE:  To change BayTech print server operating and port parameters,
you must be logged in as a supervisor.

Summary of Contents for LASERSHARE PS-MIO






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands