BayTech LASERSHARE PS-MIO, Owner'S Manual

Page: 109 / 133

MSHELL STANDARD MESSAGE SUMMARY
Message Description
to establish a virtual connection for dial-out
communication.
Dialing Out This message is displayed when the network modem
is dialing a remote modem.
Dial In Service Closed This message is displayed when the command ---BT[]
is sent to instruct an advertising workstation for dial-in
operation to stop advertising.
No open Connection This message is displayed when the command ---BT[]
is sent to terminate a dial-out virtual connection and
no such connection exists.
OK This message is displayed using dial-out operation in
response to an AT command when no connection
exists.
MSHELL ERROR SUMMARY
Error Description
Error : Timeout Awaiting Close! This error is displayed when a virtual connection did not
close properly.
Error : Communication Failure! This error is displayed when the virtual connection is
broken in the middle of a dial-out communication
session.
Error : PrintServer not found! This error is displayed when the print server name
specified for a dial-out connection does not exist on the
network.
Error : Comm Channel failure! This error is displayed when there is a communication
failure in the middle of a dial-in session (IPX failure).
Error : Exceeded Max
Connections! This error is displayed when are not enough SPX
connections in the NET.CFG file.
Error : Closing Comm Channel! This error is displayed when there is an IPX failure.
Error : PrintServer Port Busy! This error is displayed while trying to connect to a
network modem when another network workstation
currently has a connection with the modem.
Error : Parallel Port requested! This error is displayed when a workstation attempts to
establish a virtual connection with a parallel port.
Error : Port not defined as Modem! This error is displayed when a workstation attempts to
establish a virtual connection with a serial port defined
for printer operation.