34
c.
Repeat this step for every BayTech print server you
wish to install. Return to the PCONSOLE main menu.
3.
If the desired print queues do not exist, define the print
queues to be serviced by the BayTech print server by first
highlighting
Print Queue Information
followed by ENTER.
Next, strike the INSERT key followed by the desired queue
name. You would typically create one print queue for each
printer connected to the BayTech print server. Return to the
PCONSOLE main menu.
4.
Assign the BayTech print server to service print queues as
follows:
a.
Highlight "Print Server Information" from the main
menu and press <ENTER>.
b.
Select the print server name entered in Step 4 from
the "Print Servers" list.
c.
Select "Print Server Configuration" from the "Print
Server Information" menu.
d.
Select "Printer Configuration". Define the printers for
the BayTech print server by selecting the desired
printers from the "Configured Printers" list. For each
printer, use the "Defined elsewhere" type.
e.
Select "Queues Serviced by Printer" from the "Print
Server Configuration" menu.
f.
Select a printer from the "Defined Printers" list.
NOTE: "Printer 0" corresponds to Port 1 of the
BayTech print server, "Printer 1" corresponds to Port
2, "Printer 2" corresponds to Port 3, and "Printer 3"
corresponds to Port 4. Although PCONSOLE shows
printers from 0 to 15, the BayTech print server will
only recognize Printer 0 to Printer 3 for the PS-4A,
PS-4C, and PS-4E and Printer 0 for the PS-MIO.
i.
Press <INSERT> at the "File
Server/Queue/Priority" box.
Summary of Contents for LASERSHARE PS-MIO
