BayTech LASERSHARE PS-MIO, Owner'S Manual

Page: 80 / 133

74
Loopback mode is initiated by sending the following
command after a virtual connection is established:
---BT[LOOPBACK_ON]. Loopback mode is terminated by
sending the following command: ---BT[LOOPBACK_OFF].
The virtual connection with the network modem may be
terminated from a DOS prompt by sending the MCLOSE
command.
The DOS method to establish and terminate virtual
connections is usually implemented via batch file. For
example, you could name the batch file MODEM.BAT.
MODEM.BAT would have the following general format:
MSHELL
MOPEN <print server name> <n>
IF ERRORLEVEL 1 GOTO END
PCOMNET
MCLOSE
END
Here, we assume you are using Procomm Plus for
Networks, executing the batch file from within the Procomm
subdirectory.
4b. Network Communications Software Method: You may
establish a virtual connection from within your network
communications software by issuing the following command:
---BT[print server name(n)] where "print server name" is
the name given to the Print Server Plus using PSQMGR and
"n" is the port number the modem is connected to on the
Print Server Plus (0 to 3).
The virtual connection may be terminated from within your
network communications software by issuing the following
command: ---BT[]. This command must be preceded by
two seconds of inactivity.