Page
45
Breaker List for device 1, MMP-27
Ckt PF Threshold (%) Pwr Threshold (W)
1 100 10
2 100 10
3 100 10
4 100 10
5 100 10
6 100 10
Enter Request :1
Unit displays breaker list of circuits.
Select the Circuit number to change
the threshold values
Breaker Circuit Threshold Menu
Device 1, Breaker Circuit 1
Efficiency Threshold: 100, Power Threshold: 10
Power/VA Power Factor Threshold....1
Minimum Power Threshold............2
Enter Request :1
Unit displays the Breaker Circuit
Threshold Menu with circuit breaker
number and current values.
Select 1),
to change the Power Factor
Threshold level. Enter a per cent
value (%).
Factory Default is (0%).
Power/VA ratio threshold as a percent, between 0 and 100,
inclusive. Power factors below this value will generate an SNMP
trap, if enabled and power is above minimum power threshold. A
value of 0 disables threshold.
Enter threshold value:
NOTE:
The Power Factor Threshold SNMP alarm is sent only if both respective values drop
below the Power Factor Threshold and Power Threshold at the same time.
Unit displays the Breaker Circuit
Threshold Menu with current values.
Select 2),
to change the Minimum
Power Threshold level. Enter a value.
Factory Default is (50w).
Breaker Circuit Threshold Menu
Device 1, Breaker Circuit 1
Efficiency Threshold: 100, Power Threshold: 10
Power/VA Power Factor Threshold....1
Minimum Power Threshold............2
Enter Request :2
Minimum power required to generate an SNMP power factor
trap if power factor is below threshold.
Enter threshold value:
Select 2),
to display Circuit Power Factor (PF)
Input Power Factor Thresholds......1
Circuit Power Factor Thresholds....2
Outlet Power Factor Thresholds.....3
Enter Request :1
