Page
33
Break Length
DHCP Enable/Disable
Telnet Enable/Disable
SSH Enable/Disable
SSH Host Key Generation
Select 5), from Network Port Configuration Menu
to adjust the break length feature. Users may
configure the RPC for a break length of 1 - 1000 milliseconds. In a Telnet session with the RPC through
the serial port of a DS74, send a Telnet break command (0xF3) to the unit, the serial port will send a
break signal of the programmed duration.
Default is 350 milliseconds
.
Select 9), from Network Port Configuration Menu
to allow the user to generate a unique SSH host
key for the RPC unit. This key is part of the SSH encryption process. Each RPC leaving Baytech is
shipped with same default SSH host key. It is important that the user generate a
new SSH host key if SSH communications will be used.
NOTE:
It can take the unit up to 10 minutes to generate a new host key.
IMPORTANT:
changing this setting will logout all SSH and Telnet sessions
IMPORTANT:
changing this setting will logout all SSH and Telnet sessions
Break Length is (msec)............ 350
Enter break length, in milliseconds (<=10000, 0 to disable) :
Select 6), from Network Port Configuration Menu
to enable or disable the DHCP feature. Dynamic
Host Configuration Protocol (DHCP) is a communications protocol that lets network administrators
manage centrally and automate the assignment of
Internet Protocol (IP) addresses in an organization's network.
Default setting is ENABLED.
Select 7), from Network Port Configuration Menu
to enable or disable the Telnet feature. Telnet is a
user command and an underlying TCP/IP protocol for accessing
remote devices.
Default setting is ENABLED.
Select 8), from Network Port Configuration Menu
to enable or disable the SSH feature. Secure
Shell (SSH), sometimes known as Secure Socket Shell, is a Unix-based command interface and
protocol for securely getting access to a remote computer. It is widely used by
network administrators to control Web and other kinds of servers
remotely.
Default setting is ENABLED
.
DHCP is...........................Enabled
Enable ? (Y/N), CR for no change) :
Telnet is.........................Enabled
Enable ? (Y/N), CR for no change) :
SSH is............................Enabled
Enable ? (Y/N), CR for no change) :
Generate ? (Y/N)
