Page
34
IP Filter Configuration
Menu 8: Network IP Filter Configuration
Delete Filter Menu
Enter rule number to delete rule, 'M' to view
more rules, or 'X' to exit menu.
Rule Num Ip Address Target
1 70.150.140.95 DROP
2 70.150.140.96 ACCEPT
3 70.150.140.99 ACCEPT
Enter Request :2
Select D),
Delete Rule
to a delete a specific
rule. The unit will respond with the Filter Rule
number deleted.
The default target is............ACCEPT
DROP ? (Y/N), CR for no change) :y
Select C),
Set Default Target
to set ALL IP
Addresses to accept or drop all
Rule Num Ip Address Target
1 70.150.140.95 DROP
2 70.150.140.96 ACCEPT
Strike ENTER to continue
Select V),
View Rules
to see any IP
filtering.
NOTE:
At least one rule must be
defined for this option to be available.
IP Filtering is ENABLED. Enable? (Y/N): y
Select E),
Enable IP Filtering
to
enable or disable the filtering function.
Filter added as Rule 1.
Selecting either DROP or ACCEPT
the packets and the RPC will assign
filter the next rule number:
Please enter a single ip address filter
or an ip address block in ip/<blockmask> notation.
: 70.150.140.95
Select a target option for this filter:
DROP the packet..................1
ACCEPT the packet................2
Exit.............................X,CR
Enter Request :1
Select A)
to
Add Rule
. Type an IP
address, select whether to drop or
accept the address.
Filter Management Menu
Enter request or CR,X to exit menu.
A)...Add Rule
E)...Enable IP Filtering
D)...Delete Rule
V)...View Rules
C)...Set Default Target
Enter Request :a
Select 10), from Network Port
Configuration Menu
the IP Filter
Management Menu allows the admin
user to pass or block certain IP
Addresses. If you have no rules defined
the unit may display only options (
A, E,
C
).
