BayTech ATS27 Manual Download Page 53 | Manualshive

Page: 53 / 56

background image

Page

53

Exceptions

BayTech Extended Warranty

Technical Support

This warranty does not cover misuse or minor imperfections that fall within design specifications or that
do not materially alter functionality. BayTech does not warrant and is not responsible for damages
incurred in shipping and handling or caused by disasters (such as fire, flood, wind, earthquake, lightning,
power surges or water).

The warranty will be voided regarding products that have been neglected, altered, abused, misused, or
used for purposes other than those for which it was designed.

Under no circumstances shall BayTech be liable for any special, incidental, or consequential damages
based upon breach of warranty, breach of contract, negligence, strict liability, or any other legal theory.
Such damages include (but are not limited to) loss of profits, loss of the product or associated equipment,
cost of capital, cost of substitute or replacement equipment, facilities or services, down time, purchaser’s
time, the claims of third parties, including customers, and injury to property.

Extended warranties and overnight replacements are available for purchase, but only at the time of
product purchase. The extended warranty cost will not exceed 7% per year of the product list price
unless otherwise stated in the customer contract or approved by BayTech management. Contact
BayTech for further details on this.

BayTech offers Tech Support for the lifetime of the product. A staff of Applications Engineers is on duty
to assist with installation, set up or operation issues. Support is available from

8:00 a.m. to 5 p.m

. (CST or

CDT), Monday through Friday at the phone numbers or website provided below.

Please have the following information available to help the Applications Engineers answer questions
efficiently:



BayTech model type



Unit serial number



Firmware version (if accessible)



A list of devices connected to the BayTech unit



A general description of the application being used and the intended outcome



Information about cables and adapters being used (type, length, place of purchase)



The name of the software emulation program being used



Printout of the configuration status (if possible)

Bay Technical Associates, Inc.
5239 A Avenue
Long Beach Industrial Park
Long Beach, MS 39560
Telephone: 800-523-2702 or 228.563.7334
FAX: 228.563.7335
Email:

[email protected]

Website:

www.baytech.net

«
...
51
52
53
54
55
...
»

Summary of Contents for ATS27

























































Reviews:

No comments

Related manuals for ATS27

SmartPro DGS-1500-20

Brand: D-Link Pages: 113

xStack DGS-3120 Series

Brand: D-Link Pages: 1150

Brand: AsGa Pages: 23

Brand: Eaton Pages: 5

Guard Master 440N-Z2NRS1A

Brand: Allen-Bradley Pages: 4

Brand: H3C Pages: 26

Brand: C4i Pages: 7

Brand: Optex Pages: 2

Brand: Hall Research Technologies Pages: 9

Storage Networking SAN128B-6

Brand: IBM Pages: 116

Brand: IDT Pages: 158

Brand: Inline Pages: 4

Brand: Allen-Bradley Pages: 4

Brand: AV Link Pages: 2

Brand: Lindy Pages: 16

Brand: Vertiv Pages: 24

Brand: SALZ Pages: 2

Brand: xpr Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands