Baxall ZMX/BD/10, Operating Instructions Manual

Page: 27 / 111

HBZMXSIB/10/16SD-PR-1 Page 26
Motion Detection
This option is used to specify whether motion detection is enabled for individual or all
the cameras. For each camera, you can specify which zones in the camera’s view
are to be active for motion detection. You can specify whether a motion detection
indicator is to be displayed on the monitor and for each camera, the motion detection
sensitivity, record rate and output relay to be used. You get the following pull-down
menu:
Camera AGC
This option is used to specify the signal gain to be used for each camera. You get the
following pull-down menu:
Communications
This option is used to specify the communications baud rate to be used. You get the
following pull-down menu:
Enable / Disable Detection
Setup Active Zones
Indicate Detection
Setup Parameters
Exit
Signal Gain Setup
Camera : 01
Gain : 05
[CANCEL] [OK]
RS232
Exit