Baxall ZMX/BD/10, Operating Instructions Manual

Page: 101 / 111

HBZMXSIB/10/16SD-OP-1 Page 25
Field Or Frame Indication (Colour Models)
A - will be displayed next to the time / date display of Camera 1 only to indicate that
‘field’ resolution has been selected. The indicator is removed if ‘frame’ resolution has
been selected.
PIP Display - Size And Position
The PIP (pics-in-pics) display on Monitor-A can be displayed in one of three sizes
(two for monochrome units), and it can be displayed in one of two positions.
Size Selection
The sizes can be 1/4, 1/9, or 1/16 of full-screen for Colour units, and 1/4 or 1/16 for
mono units.
Position Selection
The PIP can either be displayed on the lower right hand side of the display, or else
on the top left hand side of the display.
Changing The PIP Size And Position In LIVE Mode
The PIP size and position can be changed during LIVE mode by using the arrow
keys. The up and down arrow keys will change its position, and the left and right
arrows will change its size, left being smaller and right being larger.
Changing Positions And Colours Of Titles
Titles can be displayed either at the top or at the bottom of the camera view, or titles
can be switched off. The titles can also be displayed as black, grey, or white
characters. This feature is selectable for each camera during either LIVE or PLAY
modes.
Select a full-screen view of that camera on Monitor-A, and then press ENTER to
toggle the title position and Colour. You can select one of seven options for each
camera.