Baxall ZMX/BD/10, Operating Instructions Manual

Page: 41 / 111

HBZMXSIB/10/16SD-PR-1 Page 40
Monitor-B key again will switch off the LED and subsequent keys will operate on
Monitor-A.
Refer to the description of the full-screen sequence list above for Monitor-A (see
page 39). The same list is used for both Monitor-A and Monitor-B, and for LIVE and
PLAY modes.
Dwell Time
The full-screen, dwell time is set in the Sequencing sub-menu under the Full-Screen
Dwell option . The same dwell time is used for both Monitor-A and Monitor-B, and for
LIVE and PLAY modes.
PIP Display - Size And Position
The PIP (picture-in-picture) display on Monitor-A can be displayed in one of three
sizes (two for monochrome units in PLAY mode), and it can be displayed in one of
two positions.
The sizes can be 1/4, 1/9, or 1/16 of full-screen for Colour units, and 1/4 or 1/16 for
mono units in PLAY mode.
The PIP can either be displayed on the lower right hand side of the display, or else
on the top left hand side of the display.
Changing The PIP Size And Position In LIVE Mode
The PIP size and position can be changed during LIVE mode by using the arrow
keys
. The up and down arrow keys will change its position, and the left and right
arrows will change its size, left being smaller and right being larger.
Editing Titles, Changing Positions And Colours
To edit the camera titles, use the Camera Titles sub-menu in the menu. The factory
defaults show the camera titles as Camera 1 - Camera n.
Titles can be displayed either at the top or at the bottom of the camera view, or the
titles can be switched off. The titles can also be displayed as black, grey, or white
characters. This feature is selectable for each camera during either LIVE or PLAY
modes.
Select a full-screen view of that camera on Monitor-A, and then press ENTER to
toggle the title position and Colour. You can select one of seven options for each
camera.
Main Camera Titles Edit Titles
Quick-Setup Edit Camera Titles