Baxall ZMX/BD/10, Operating Instructions Manual

Page: 65 / 111

HBZMXSIB/10/16SD-PR-1 Page 64
For each of the 20 events choose a Day, a Time and the Macro to run for that event
entry:
Day: select the day of the week, 1-7, on which the event must start a macro. To
see the day of the week corresponding to today’s date, select the Date set up
menu from the Time/Date sub-menu. If the macro is to be run every day at the
same time, select ‘**’ for the Day field. If a 0 is entered for the day, the scheduled
event entry is cancelled and will not start the macro.
Time: Select the time to run the macro function.
Macro: Enter the number of the macro to run.
Keep a record of scheduled events for easy reference. A table is provided in the back
of this manual to list the scheduled events.
Remote Control
RS-232 Remote Control
RS-232 remote control is via a 9 way ‘D’ type connector, on the rear panel. This is
used to provide fully-programmable remote control from a PC or similar controller. It
is possible to read and set up all the menu functions and also control the front panel
controls via the RS-232 port.
Functions included are:
Menu programmed functions
All front panel keys
Alarm history read
Operating Status read
RS-232 baud rates are selectable from 1200 to 9600. The factory default is 9600.
To set the baud rate, select the RS-232 option of the Communications sub-menu.
Refer to Appendix A, RS-232 REMOTE PROTOCOL for more details.