Baxall ZMX/BD/10, Operating Instructions Manual

Page: 105 / 111

HBZMXSIB/10/16SD-OP-1 Page 29
2.7 Alarms
Alarm Handling Capability
Alarms will result in an automatic full-screen image of the camera in alarm on
Monitor-A and Monitor-B. You can manually freeze the camera-in-alarm displayed on
Monitor-A.
The alarms will activate an output relay, Relay 1. The alarms can be latched until
accepted by the operator, or latched for a preset time, or can be set to follow the
status of the alarm input (called transparent). The alarm latching is a system-wide
setting, selectable by you.
Simple menu tables make it quick and easy for you to select the desired alarm
action.
Alarm Displays In Live Mode
Monitor-A Full-Screen During Alarms
During alarms in LIVE mode, Monitor-A will automatically switch to a full-screen
display of the camera in alarm. If multiple alarms are active, Monitor-A will
automatically sequence between the alarm cameras at a fixed 1 second dwell. This
dwell is not programmable.
Freezing Alarms On Monitor-A In Live Mode
You can freeze the camera in alarm on Monitor-A by pressing the FREEZE key.
Monitor-B Full-Screen During Alarms
During alarms in LIVE mode, Monitor-B will automatically switch to the camera in
alarm. If multiple alarms are active, Monitor-B will automatically sequence between
the alarm cameras at a fixed 1 second dwell. This dwell is not programmable.
Monitor-B cannot freeze images.
Note
The Monitor-B screen will not revert to its original fixed display after the alarm is
cleared. It will continue to display the last alarm camera. However, if sequencing
was active on Monitor-B before the alarm, then Monitor-B will continue to
sequence after the alarm is cleared.