Baxall ZMX/BD/10, Operating Instructions Manual

Page: 43 / 111

HBZMXSIB/10/16SD-PR-1 Page 42
To adjust the clock by an hour for Summer / Winter time changes press the
FUNCTION key
and then press the SEQUENCE key.
In March and April, this will cause the time to be adjusted forward by one hour.
In September and October, this will cause the time to be adjusted back by one hour.
This function can only be used once in each period. For example, if you press
FU SEQUENCE during March, it will add an hour to the time. If
FU SEQUENCE is pressed again, then it will be ignored until September.
When setting the date, select the correct day of the week, 1 to 7. For example, if
today’s date is set on a Wednesday and Sunday is day 1 in the week, then enter a ‘4’
during date set-up. This is used to start Timed Macros on the correct day.
The time can be in one of two formats, and the date can be in one of three formats.
The time format can be either to a 12 hour or 24 hour clock. The date format can be
either DD/MM/YY, MM/DD/YY, or YY/MM/DD.
To change time and date Colour on Monitor-A, select camera 1 full-screen, and
toggle its title position and Colour as described on page 40. Each time the cycle is
completed for camera 1, the time/date Colour will be toggled to a new Colour. This
time/date Colour setting is a global system setting.
When the time/date Colour has been selected, toggle the camera 1 title position and
Colour to its desired state.
Note
The time/date display can be turned OFF for either MON-A or MON-B in the menu
system, using the Time/Date sub-menu. The MON-A setting is effective in both
LIVE and PLAY modes.