Barco Galaxy 12 High Brightness+ R9040370, Owner'S Manual

Page: 160 / 173

9. Service Mode
9.16.1.3 Standard Color Coordinates
Color Coordinates Interface
Following parameters are available in the DynaColor™ interface:
Measured Values
These are the colors the projector displays when no color changes are made.
Red x, y Cooprdinates for the Red point
Green x, y Coordinates for the Green point
Blue x, y Coordinates for the Blue point
White x, y Coordinates for the White point
Red Y Red light output
Green Y Green light output
Blue Y Blue light output
White Y Maximum light output = 1
Desired Values
These are the colors you want the projector to display when the status is enabled
Red x, y Coordinates for the Red point
Green x, y Coordinates for the Green point
Blue x, y Coordinates for the Blue point
White x, y Coordinates for the White point
Status
Enables or disables DynaColor™
How to use the Color Coordinates menu?
We assume we have a basic setup with 2 projectors, the Dynacolor™ adjustment is done by using only the Dynacolor™ menu:
1. Enable Dynacolor™ on both projectors.
2. Assume the first projector has the following measured values. (menu 9-44)
3. Assume the second projector has the following measured values. (menu 9-45)
4. We start by setting both projectors to the common red coordinate. (image 9-5)
Tip: Draw a quick sketch of both gamuts as a graphical help.
5. Display the internal color bar pattern on both projectors.
6. In the desired values, adjust the red coordinate to a common value for both projectors. (image 9-6)
Tip: The color bar of the adjusted coordinate will no longer be displayed in case the coordinate is not present within the gamut
of the adjusted projector e.g. with the desired values for red set to x=660 and y= 318.
7. Select a coordinate that is present in the common gamut e.g. with the desired values for red set to x=633 and y= 328. (image 9-7)
8. Repeat step 5 to 6 for all coordinates on both projectors.
Both projectors will now operate within the same color gamut.
DYNACOLOR
MEASURED
x y Y
R: 0.662 0.323 0.087
G: 0.306 0.682 0.846
B: 0.125 0.069 0.067
W: 0.287 0.396 1
DESIRED
x Y
R: 0.719 0.278
G: 0.306 0.682
B: 0.125 0.069
W: 0.287 0.396
STATUS: [ACTIVE]
<ENTER> to edit/confirm
<EXIT> to return
press <*> for factory preset
press <?> for purity pattern
Menu 9-44
DYNACOLOR
MEASURED
x y Y
R: 0.658 0.305 0.093
G: 0.342 0.641 0.838
B: 0.142 0.080 0.069
W: 0.254 0.377 1
DESIRED
x y
R: 0.699 0.256
G: 0.372 0.641
B: 0.153 0.085
W: 0.278 0.369
STATUS [ACTIVE]
<ENTER> to edit/confirm
<EXIT> to return
press <*> for factory preset
press <?> for purity pattern
Menu 9-45
156 R5976780 GALAXY SXGA+ SERIES 14/10/2005