Barco Galaxy 12 High Brightness+ R9040370, Owner'S Manual

Page: 150 / 173

9. Service Mode
Following Mode Settings are available:
[NORMAL] Normal Light Output
[ECONOMIC] Reduced Light Output
Table 9-3
(Lamp) Mode Settings
LAMP
CONSTANT LIGHT OUTPUT [ON]
LINKED CLO [SLAVE]
MODE [NORMAL]
TARGET CLO LUMENS: 10000
LAMP RUNTIME WARNING [MAXIMUM]
_________________________________
Serial number : 003706
Article number : R9840740
Run time : 140 hours
Remaining run time : 1360
hours
Number of strikes : 160
Z-axis : 100 units
_________________________________
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return
Menu 9-17
9.8.5 Target CLO Lumens
How to change the Target CLO Lumens Setting?
1. Push the cursor key ↑ or ↓ to highlight
Target CLO Lumens.
(menu 9-18)
2. Press
ENTER
to activate the digits.
3. Use the numeric keys and/or cursor keys to set Target CLO Lumens to the desired value.
Note: It is not possible to set the Target CLO Lumens to a value, higher than the maximum default value.
These are the maximum default Target CLO Lumens values for the Galaxy SXGA+ series.
Galaxy SXGA+ Projector Productnumber Maximum default Target CLO
Lumens value
Galaxy 6 (Classic)
Galaxy 6 in Contrast Enhancement
mode
R9040360
R9040360
6000 lumens
4700 lumens
Galaxy 12 HB+ (High Brightness)
Galaxy 12 HB+ in Contrast Enhancement mode
R9040370
R9040370
9500 lumens
7500 lumens
4. Press
ENTER
to confirm.
LAMP
CONSTANT LIGHT OUTPUT [ON]
LINKED CLO [SLAVE]
MODE [NORMAL]
TARGET CLO LUMENS: 10000
LAMP RUNTIME WARNING [MAXIMUM]
_________________________________
Serial number : 003706
Article number : R9840740
Run time : 140 hours
Remaining run time : 1360
hours
Number of strikes : 160
Z-axis : 100 units
_________________________________
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return
Menu 9-18
146 R5976780 GALAXY SXGA+ SERIES 14/10/2005