Barco Galaxy 12 High Brightness+ R9040370, Owner'S Manual

Page: 113 / 173

7. Random Access
7.5.7.9.4 Switching on the Soft Edge
How to switch on the Soft Edge?
The Soft Edge is switched On/Off inside the Windowing menu.
The Active [On] or [Off] menu item is grayed out an will only show the current soft edge status.
[OFF] Soft Edge is disabled
[ON] Soft Edge is enabled
7.5.7.9.5 Soft Edge Shape Start up
What can be done with the Soft Edge Shape menu ?
Before creating a soft edge, an overlap zone is created, the shape of this overlap zone is fully adjustable, within this menu the shape
of the blending zone is aligned with the shape of the overlap zone.
How to Start Up the Soft Edge Shape menu ?
1. Push the cursor key ↑ or ↓ to highlight
Shape
in the
Blanking/Soft Edge
menu. (menu 7-109)
2. Press
ENTER
to select.
The
Shape
menu will be displayed. (menu 7-110)
BLANKING/SOFT EDGE
ACTIVE [ON]
BLANKING
SOFT EDGE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-109
SHAPE
top left
% of image = 0
%% of image = 0
Menu 7-110
7.5.7.9.6 Soft Edge Shape selections
How the use the Soft Edge Shape selection ?
1. Push the cursor key ↑ or ↓ to highlight the first item in the
Shape
menu. (menu 7-111)
2. Press
ENTER
to scroll through the available coarse shape selections: top, bottom, left and right. (image 7-45)
3. Push the cursor key ← or → to scroll through the available fine shape selections.image 7-45
SHAPE
top left
% of image = 0
%% of image = 0
Menu 7-111
R5976780 GALAXY SXGA+ SERIES 14/10/2005 109