Barco Galaxy 12 High Brightness+ R9040370, Owner'S Manual

Page: 146 / 173

9. Service Mode
9.6.2 Changing the Projector Address
How to Change the Projector Address?
1. Push the cursor key ↑ or ↓ to highlight
Projector Address
. (menu 9-9)
2. Press
ENTER
to select.
The actual address is filled in.
The first digit is highlighted.
CHANGE PROJECTOR ADDRESS
PROJECTOR ADDRESS 6
COMMON ADDRESS (RC5) 0
COMMON ADDRESS (PPM) 0
Select with
↑
or
↓
then <ENTER>
Reprogram with
↑
,
↓
,
←
,
→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 9-9
How to Enter the new Projector Address?
1. Enter the digits with the digit keys on the RCU or local keypad.
Or,
push the cursor keys
← or → to select a digit and change the value by pushing the cursor key ↑ or ↓ until the new value is reached.
Continue with the other digits on the same way. The individual address must be between 0 and 255.
In a Linked CLO and/or Dynacolor™ setup a maximum of 14 projectors can be linked, all projectors must have
a different projector address between 0 and 13.
9.6.3 Changing the Common Address
How to Change the Common Address?
1. Push the cursor key ↑ or ↓ to highlight the active
Common Address
e.g. (RC5). (menu 9-10)
2. Press
ENTER
to select.
CHANGE PROJECTOR ADDRESS
PROJECTOR ADDRESS 6
COMMON ADDRESS (RC5) 0
COMMON ADDRESS (PPM) 0
Select with
↑
or
↓
then <ENTER>
Reprogram with
↑
,
↓
,
←
,
→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 9-10
Entering the new Common Address
1. Enter with the digit keys on the RCU or the local keypad
Or,
pushing the cursor key
↑ or ↓ until the new value is reached.
Only addresses between 0 and 1 are valid.
142 R5976780 GALAXY SXGA+ SERIES 14/10/2005