manualshive.com logo in svg

Barco DCS-200, User Manual

The Barco DCS-200, a top-tier switcher with powerful specifications, enhances any presentation setup. Detailed manual available for free download at manualshive.com, offering comprehensive guidance on features and operation. Ensure optimal utilization of this dynamic device by downloading the manual today!

Share
Download
background image

8

DCS-200  •  User’s Guide

Table of Contents

Quick Setup and Operations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36
Menu Tree  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  38
Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39
Quick Function Reference  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41
Status Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44
Using the Setup Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46

Trans Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47
Output Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47

Output Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  48
Test Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  48
Sync Setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  49
Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  49
Save Output Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  49

Preview Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50

Output Src . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51
Output Format (Preview) . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51
Test Patterns (Preview) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52
Preview Sync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52
Save (Preview)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53

Input Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53

Input Format  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55
Adjust On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55
Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  56
Colorspace  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  56
Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57
Timing Adjust. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57
Image Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61
Color Balance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62
Processing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63
About Input Configuration Files . . . . . . . . . . . . . . . . . . . . . . .  63
Reset Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  64
Save Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  64
Delete Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65
Recall Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66

Key Setup Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67
LOGO Setup Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69
User Preference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  70

In Auto Acquire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  70
Auto Input Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  71
Auto Input Save. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72
Auto Take  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72
Black Auto Take  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72
Key Auto Take . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72
Menu Context  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72

System Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  73

VFD Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  73
Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  74
Serial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  76
EDID Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  77
DVI Cable Equalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  79

Summary of Contents for DCS-200











































































































































































Reviews:

No comments

Related manuals for DCS-200

Zektor CVS4 User Manual Supplement preview
CVS4
Brand: Zektor Pages: 17
H3C S5800-EI Series Installation Manual preview
S5800-EI Series
Brand: H3C Pages: 61
CoolGear USBBG-12U2ML Installation Manual preview
USBBG-12U2ML
Brand: CoolGear Pages: 2
Movie Vision VCS-3 Installation And User Manual preview
VCS-3
Brand: Movie Vision Pages: 2
SMC Networks SMC8724-10BT Technical Specifications preview
SMC8724-10BT
Brand: SMC Networks Pages: 2
Omega Engineering PSW32 SERIES User Manual preview
PSW32 SERIES
Brand: Omega Engineering Pages: 8
DAB ESC plus 3M Instruction For Installation And Maintenance preview
ESC plus 3M
Brand: DAB Pages: 56
ATEN CS1922M User Manual preview
CS1922M
Brand: ATEN Pages: 17
netvox ZigBee Z815B User Manual preview
ZigBee Z815B
Brand: netvox Pages: 14
Accton Technology EtherHub-16 Quick Start Manual preview
EtherHub-16
Brand: Accton Technology Pages: 10
Lancom GS-3528X Installation Manual preview
GS-3528X
Brand: Lancom Pages: 23
TRENDnet TEG-S50TXE SHEETS User Manual preview
TEG-S50TXE SHEETS
Brand: TRENDnet Pages: 20
H3C LSW1GP16P0 User Manual preview
LSW1GP16P0
Brand: H3C Pages: 26
Optex OAM-DUAL T Operation Manual preview
OAM-DUAL T
Brand: Optex Pages: 2
Hall Research Technologies KVMC-UH-8 User Manual preview
KVMC-UH-8
Brand: Hall Research Technologies Pages: 9
S&S Northern Merlin CS1 User Manual preview
Merlin CS1
Brand: S&S Northern Pages: 8
IDT 89HPES12N3 User Manual preview
89HPES12N3
Brand: IDT Pages: 158
Scame electrical solutions ROCKER-EXGD Instructions For Installation, Use And Maintenance Manual preview
ROCKER-EXGD
Brand: Scame electrical solutions Pages: 68

Brands by name

Popular brands

Load more brands