DCS-200 • User’s Guide
23
2. Hardware Orientation
DCS-200 Front Panel
•
The
SDI
button selects the SD-SDI or HD-SDI input source.
•
The
LOGO
button selects the stored “full screen” LOGO image for the next
transition. If no image is stored, the transition will be to Black. Use the menu to
select one of three stored LOGOs for use. In Chapter 4, refer to the “
” section on page 88 for details.
bÑÑÉÅíë=pÉÅíáçå
The figure below illustrates the
Effects Section
:
Figure 2-5.
Effects Section
The buttons in the
Effects Section
enable you to freeze the selected source on Program,
transition to black, and perform a key over the selected Program source.
Following are descriptions of each “effects” button:
•
The
FRZ
button instantly freezes and unfreezes the current Program source.
When the source is frozen, the button is lit solid. In Chapter 4, refer to the “
” section on page 92 for details.
•
The
BLACK
button enables you to transition to or from black. The button
performs one of two functions, depending on the way the button is defined in the
User Preferences Menu
.
~
If “
Black Auto Take
” is
Off
:
•
Press
BLACK
to pend a transition to or from black. The button
blinks to indicate “pending.”
•
Press
TAKE
to perform the transition to or from black.
–
If the transition is “
to
” black, the button lights solid
when black is on Program.
–
If the transition is “
from
” black, the button turns off
when the selected source is fully on Program.
SDI
LOGO
Note
If you press a button in the
Inputs Section
, it blinks to
indicate “pending.” If you
do not
want to pend a source
(which may be desirable in some situations), press the
blinking source button again. The button turns off, leaving
only the source on Program lit solid.
Effects
KEY
FRZ
BLACK
FRZ
BLACK
