72
DCS-200 • User’s Guide
4. Operation
Using the Setup Menu
•
When
ON
, the system automatically finds the first and last pixel on each edge of
the selected input, and ensures (to the best possible extent) that the entire image
is visible. In addition, the system automatically phases the input to determine the
correct sampling phase.
These functions will only be performed under the following conditions:
~
When an input
without
a saved configuration file is selected.
~
When the input signal changes sync rates.
~
When an input
with
a saved
configuration file is selected, but the input
timing is different from the saved configuration.
•
When
OFF
, the system uses the last known configuration for each input, to the
greatest extent possible.
^ìíç=fåéìí=p~îÉ
When the
Auto Input Save
mode is enabled, the system automatically saves the selected
input after it has been acquired for the first time. If the
In Auto Acquire
mode is
OFF
, the
field has no effect. The default is
ON
.
^ìíç=q~âÉ
The
Auto Take
mode allows you to bring an input source to Program by simply pressing an
input button (
1
through
8
,
SDI
, or
LOGO
), and without requiring a Take.
Regardless of your
In Auto Acquire
settings, the input button you select blinks “fast,” to
indicate that the system is performing an action such as an auto acquire, file association, or
another action. When the system completes its tasks for the input, the button blinks “slow”
to indicate that the input is ready to be taken to Program. Lastly, the button lights solid and
the source goes to Program automatically.
•
When
ON
,
Auto Take
overrides user preferences for
Black Auto Take
and
Key
Auto Take
. The values for these two menu items are bracketed.
•
When
OFF
, the selected input button blinks “fast” and then “slow.” Press
TAKE
to
perform the transition.
_ä~Åâ=^ìíç=q~âÉ
The
Black Auto Take
function controls the behavior of the
BLACK
button:
•
When
ON
, the
BLACK
button transitions the Program output to/from black, as
soon as the button is pushed.
•
When
OFF
, the
BLACK
button blinks when pressed, to indicate “pending.” Press
TAKE
to perform a transition to/from black.
Refer to the “
” section on page 93 for details.
hÉó=^ìíç=q~âÉ
The
Key Auto Take
function controls the behavior of the
KEY
button:
•
When
ON
, the
KEY
button performs a
Key Up
or
Key Down
transition, as soon
as the button is pushed.
•
When
OFF
, the
KEY
button blinks when pressed, to indicate “pending.” Press
TAKE
to perform a
Key Up
or
Key Down
.
Refer to the “
” section on page 95 for details.
